Jäta tooteinfo vahele
1 kohta 8

GEPRC MOZ7 V2 DJI O4 Pro HD 6S BNF Crossfire + GPS

GEPRC MOZ7 V2 DJI O4 Pro HD 6S BNF Crossfire + GPS

Hind €659,95 EUR
Hind Allahindlus €659,95 EUR
Allahindlus Välja müüdud
Sisaldab käibemaksu. Saatmiskulud arvutatakse kassas.
Tarneaeg
Tarneaeg:

8-10 tööpäeva

Break the distance and capture extraordinary images with the new MOZ7 series!

GEPRC's MOZ7 V2 is a 7.5" Long Range drone that continues the design concept of traditional models with a custom protective side plate. Two battery and action camera mounting options are available to create your own setup.

This BNF is equipped with the DJI O4 Pro, a TAKER H743 50A stack, 2809 motors, HQprop 7.5x3.7x3 propellers, a dual gyro, a M1025 GPS as well as a TBS Crossfire receiver.

Note: The included radio receiver is a TBS Crossfire Nano RX and not a TBS Crossfire Nano Diversity RX, so there is only one Immortal T antenna for radio reception. GEPRC provides a dual antenna setup via a UFL to SMA to connect an additional (not included) Bardpole type antenna to the back of the BNF.

Featuring

  • Reinforced frame for better stability.
  • DJI O4 Air Unit Pro supports 4K/120fps and 1080p/100fps H.265 image transmission.
  • Upgraded V1.1 version 2809-1450KV motors provide up to 25 minutes of flight time.
  • GEP-M1025 GPS offers a quick, stable satellite connection.
  • Reinforced side bars ensure a balanced center of gravity.
  • Swappable action camera mount for versatile positioning.
  • Two battery mounting options for flexible setup.
  • Paired TAKER H743 BT FC with MPU6000&ICM42688-P gyro for fast data processing and stable flight.
  • Equipped with GEP-BL32 50A 96K 4-in-1 ESC 32-bit delivers smooth, responsive control.
Toote info

Frame: GEP-MOZ7 V2
Wheelbase: 336mm
Top Plate Thickness: 2.5mm
Base Plate Thickness: 2.5mm
Middle Plate Thickness: 3mm
Arms Thickness: 6mm
FC: TAKER H743 BT
MCU: STM32H743
Gyroscope: MPU6000&42688-P dual
Barometer: Yes
GPS: GEP-M1025
OSD: BetaFlight OSD w/ AT7456E chip
ESC: GEP-4IN1ESC_32-50A
VTX: DJI O4 Air Unit Pro Air Unit module
Camera DJI O4 Air Unit Pro camera module
Antenna: Momoda2-SMA-LHCP right rotate-RG141 black wire- 170mm- inner threads
Power Connector: XT60E-M
Motor: SPEEDX2 2809-1450KV V1.1
Prop: HQ 7.5*3.7*3 3-blade_transparent grey
Version Weight: HD 750±10g
Receiver: TBSNanoRX
Recommended Battery (not included) : LiPo 6S 3300mAh / Lilon 8000mAh
Flight Time: 25 mins (Tested at slow cruising speeds; the actual may vary due to product differences, firmware version, flying style, and environment.)

Komplektis

1x GEPRC MOZ7 V2 FPV
2x HQ 7.5*3.7*3 (2CW+2CCW)
2x 15*250mm battery strap
1x L-shaped screwdriver 1.5mm
1x L-shaped screwdriver 2.0mm
1x L-shaped screwdriver 3.0mm
1x Spare screw pack
2x Battery anti-slip pad
1x Frequency pairing ejector pin
2x VTX antenna

Vaata kõiki üksikasju
Extra product image